Template of Checklist For Any BBT Project

TEMPLATE OF CHECKLIST OF A BBT PROJECT
Customers Name / Company
Factory Address with Location
Factory Contact Persons
Contact Number
Inspection Date
BUSBAR TRUNKING SYSTEM DETAILS (ELECTRICAL):
BBT Rating
BBT Type	❒ Aluminum	❒ Cupper	❒ Both
Installation Type	❒ Vertical	❒ Horizontal	❒ Both
BBT Classification	❒ Power BBT	❒ Lighting BBT
	❒ Machine BBT	❒ Trolley BBT
Year of Manufacturing
Model Number
VISUAL INSPECTION:			RECOM.
Encloser Colour Ok	❒ Yes	❒ No
Hanging Arrangement	❒ Yes	❒ No
Cleanliness	❒ Yes	❒ No
Tap off Box Joint	❒ Yes	❒ No
BBT Joint Cover	❒ Yes	❒ No
BBT End Cap	❒ Yes	❒ No
Chance of Water Injection	❒ Yes	❒ No
BBT Cross over with any water pipe	❒ Yes	❒ No
INSTALLATION CHECKLIST			RECOM.
1. Inspect all elements on receipt and ensure that neither the conductors nor their insulation have been damaged during handling and/or storage.	❒ Yes	❒ No
2. Install the elements in accordance with the planned layout as indicated in the installation drawings supplied.	❒ Yes	❒ No
3, Ensure that the spacing between adjoining elements is correct.	❒ Yes	❒ No
4. Check the insulation resistance of the layout. No other equipment (tap-off units, end feed units, etc.) must be connected at this time.	❒ Yes	❒ No
5. Place the covers on the mechanical junctions (see Connecting units)	❒ Yes	❒ No
6. BBT connection with DB/LT/Transformer/Generator: Sufficient capacity Busbar used and tighten	❒ Yes	❒ No
7. Vibration and other safety measure checked	❒ Yes	❒ No
8. TAP- OFF Box and Joint boxes installed and tighten as recommended	❒ Yes	❒ No
8. All tap-off boxes are good condition and checked operation	❒ Yes	❒ No
10. BBT is not bent after tap-off boxes installation	❒ Yes	❒ No
11. Earthing connection done as recommended and earthing resistance is equal to or less than 01 ohms.	❒ Yes	❒ No