My Portfolio

REMON DAS
Address: Flat#16F1, Tower#7, Suvastu Nazar Valley,
Shahajadpur, Gulshan, Dhaka-1212
Contact: +880 1839232615
Email: remondas4@gmail.com

CAREER GOAL:

To pursue development in the field of Electrical & Electronics Engineering (EEE), for Industrial and Project Sector of Bangladesh, where I can demonstrate my technical and experimental skills and contribute to the development of this Electrical & Electronics arena.

PROFESSIONAL CREDENTIALS:

[i] Electrical Supervisory License (Grade ABC) Under Ministry of Power, Energy and Mineral Resources, The People’s Republic of Bangladesh. License Number: S-60/14945 

[ii] Member of The Institute of Engineers, Bangladesh (IEB). Membership Number: M-40235 

EDUCATION:
[i] Masters of Business Administration (MBA) in Supply Chain Management (SCM) from Bangladesh University of Professionals, Bangladesh.
Grade Point: 3.68 out of 4 : April, 2017

[ii] Bachelor of Science (Honors) in Electrical and Electronics Engineering (EEE) from International Islamic University Chittagong (IIUC), Bangladesh.
Grade Point: 3.85 out of 4 : April, 2014

[iii] Higher Secondary Certificate (HSC) from Islamia Degree College, Chittagong, Bangladesh.
Grade Point: 4.10 out of 5  :  July, 2009

[iv] Secondary School Certificate (SSC) from Kalipur Ezharul Hoque High School, Chittagong, Bangladesh. 
Grade Point: 4.38 out of 5  : June, 2007

JOB EXPERIENCE:
[i] Post:                  Engineer, Grade I (Design, Installation & Commissioning)
    Company Name:  Cross World Power Ltd
    Location:             Gulshan-2, Dhaka.
    Duration:            20th March 2017 to till now.
    Responsibilities:

• Design, Installation, Testing and Commissioning of 11/.415KV Substation
• Design, Installation, Testing and Commissioning of 33/11KV Substation
• Installation, Testing and Commissioning of Bus Bar Trunking System in different application/factories
• Design & Installation of LT Panel, ATS Panel, Synchronization Panel, PFI Panel, MDB and DB Panel
• Prepare Electrical Single Line Diagram (SLD) for 11KV to 33KV SS, Earthing Layout, LPS and Substation room layout as per Accord, Alliance and BNBC Code
• Testing of Insulation Resistance (IR), Earthing Resistance (ER) and Temperature Rise for Substation, BBT and any other electrical appliance
• Overall lead the project installation and commissioning team and consolidate the safety petrol of projects team.
• Coordinate with management, client and project I & C team regarding PTS (Project Time Schedule) and meet the deadline.

[ii] Post:                   Electrical Engineer.
     Company Name:  Pleiades Engineering Ltd (Dhaka Metro Rail Project).
     Location:             Gulshan-2, Dhaka.
     Duration:            15th March 2015 to 18th March 2017
     Responsibilities:

• Produce electric design (HT & LT switch gear, DB, SDB, MDB and PFI panel, wiring diagram etc.)
• Installation, Testing & Commissioning of Sub-Station, Generator & BBT
• Supervise & monitoring of contractors work as per schedule & standard
• Coordination with supplier contractor, vendor & Supply Chain Department
• Coordination with consultant & Project Management Department
• Prepare BOQ, Purchase requisition & materials flow schedule
• Oversee design, technical specification, installation and commissioning of electrical equipment and assembling projects.

[iii] Post:                  Assistant Engineer (Design & Marketing)
      Company Name: Automation Engineering & Controls Ltd.
      Location:            Uttara, Dhaka.
      Duration:            19th July 2014-14th March 2015
      Responsibilities:

• Produce detail 2D drawing of HT switchgear, LT switch gear, DB, SDB, MDB and PFI panel according to offer
• Produce different parts and other technical drawings of transformer, BBT drawing (2D & Isometric)
• Produce any other Technical drawing (Wiring diagram, control circuit wiring diagram, earthling details, layout plan etc) as per requirement
• Provide technical support on PLC & Inverter, Site Survey, Requirement Analysis, System design, Prepare Price Quotation & Final Offer Submission.

IEEE PUBLICATIONS:

[1] Das R, Chowdhury UA, “PI Controlled Bi-Directional DC DC Converter and Highly Efficient Boost Converter for Electric Vehicle”, 3rd IEEE International Conference on Electrical Engineering and Information & Communication Technology (iCEEiCT-2016) at Military Institute of Science and Technology (MIST), Dhaka, Bangladesh on September 22-26, 2016 (DOI:10.1109/CEEICT.2016.7873094) 

[2] Das R, Rashid H, Ahmed IU, “A Comparative Analysis of PI and PID Controlled Bidirectional DC-DC Converter with Conventional Bidirectional DC-DC Converter”, “3rd IEEE International Conference on Electrical Information and Communication Technology” at Khulna University of Engineering and Technology (KUET), Khulna, Bangladesh on December 7-9, 2017 (DOI: 10.1109/EICT.2017.8275149) 

[3] Rashid H, Osman SB, Hassan N, Ahmed IU, Das R, Karim M, “A New Design Approach of Home Automation System for Patients with Physical Disability to Reduce Water Wastage and Power Consumption using Renewable Energy”, “4th IEEE International Conference on Advances in Electrical Engineering” at Independent University Bangladesh (IUB), Dhaka, Bangladesh on September 28-30, 2017 (DOI: 10.1109/ICAEE.2017.8255458) 

[4] Faisal SMRF, Ahmed IU, Rashid H, Das R, Karim M, Reza SMT, “Design and Development of an Autonomous Floodgate using Arduino Uno and Motor Drive Controller”, “4th IEEE International Conference on Advances in Electrical Engineering” at Independent University Bangladesh (IUB), Dhaka, Bangladesh on September 28-30, 2017 (DOI: 10.1109/ICAEE.2017.8255366) 

CONFERENCE PAPERS: 

[1] Das R, Uddin MR, Islam M, Rashid H, Rahaman MS, “A New Approach of Portable Smart Table for Interactive Class Room”, “International Summit on Employability & Soft Skills” at Daffodil International University, Dhaka, Bangladesh on March 23-25, 2017, P 19 

[2] Das R, Das G, Sijanur R, Rashid H, “Imminent Sustainable Economic Development of Bangladesh with Coal Based Power Plants”, International Conference On Sustainable Development (ICSD 17) at United International University (UIU), Dhaka, Bangladesh on February 16-18, 2019, P 147-155 

[3] Rashid H, Ahmed IU, Das R, Newaj F, Reza SMRT, “Emergency Wireless Health Monitoring System Using Wearable Technology for Refugee Camp and Disaster Affected People”, International Conference on Computer, Communication, Chemical, Materials and Electronic Engineering (IC4ME2-2017) at Rajshahi University (RU), Rajshahi, Bangladesh, on January 27-28, 2017, 

[4] Hassan N, Rashid H, Das R, “Smart Health Management System for Rural Area of Bangladesh Utilizing Smartphone and NID”, International Conference On Business & Management (ICBM 17) at Brac University, Dhaka, Bangladesh, on September 21-22, 2017, P 191-194 

PRESENTATIONS IN BUSINESS SUMMITS: 

[1] Das R, Mazumder C and Das Gupta U, “Business Idea On Solar Based Universal Battery Charging Station” Presented at “Mecceleration 2016” Organized By: Department of Mechanical & Chemical Engineering, Islamic University of Technology(IUT) in IUT Campus on July 22, 2016. 

[2] Das R and Das Gupta U, “Business Idea On Nakshi Kantha (Quilt), A Combination of South Asian and Bangladeshi Rural Culture” Presented at “3rd Annual Social Business Youth Summit” Organized By: SBYA Global in Westin, Dhaka, Bangladesh on August 12-13, 2016. 

INDUSTRIAL ATTACHMENT & TRAINING:

[i] “Industrial technology on Electrical Engineering & Instrumentation” 

At “Training Institute for Chemical Industries (TICI)”. 

Location: Polash, Norsingdi, Bangladesh

Duration: 7th December, 2013 – 30th December, 2013 (120 hrs): Grade: A+

[ii] Industrial training on “Electrical Automation & Instrumentation” 

At Sheema Automatic Re-Rolling Mills Ltd. (SARM), Manufacturer of Supreme 500W Deformed Bar. Factory: Banur Bazar, Bhatiary, Sitakunda, Chittagong, Bangladesh. 

Duration: 1st august, 2013 – 8th august, 2013 (7 days)

[iii] Industrial training on “Substation” at “Bakolia Substation“, Bicroy abong Bitaran Bivag (Sales & Distribution)” Location: Bakalia Substation, Bangladesh Power Development Board (BPDB), Chittagong, Bangladesh.

Duration: 28th & 29th November,2013 (2 Day)

[iv] Auto CAD (Computer Aid Design) June,2012 (Electrical Drawing, Mechanical Drawing & Civil Drawing in 2D & 3D)

At “New Horizons” Computer Learning Center, Chittagong, Bangladesh

Duration: 6 Months (60 Hours)

[v] Computer Office Application course. June, 2010

(Ms. Word, Ms. Excel, Ms. Access, Ms. Power point, Basic Hardware concept, Internet & E-mail.) At “BYTA” Computer Education, Chittagong, Bangladesh

Duration: 3 Months.

[vi] Lab-based Communicative English Language Training Course May, 2010

At “Foreign Language Training Center (FLTC)”, Chittagong, Bangladesh

Duration: 3 Months.

MBA THESIS: 

Artificial Intelligence Based Transportation System for Logistic Management in Manufacturing Industry.

B.SC. THESIS:

Design and analysis of a PI controlled Bi-directional DC to DC converter and a high efficient boost converter for Electric Vehicle Application.

PARTICIPATION IN WORKSHOPS AND SEMINARS:

[i] Workshop On Microcontroller(PIC16F887)

Organized By: E.E.E. Club of International Islamic University Chittagong, Bangladesh. Presented By: Mohammed Abdul Kader, Lecturer, EEE,IIUC.

Duration: 1 Day.

[ii] Seminar on the Industrial Experience Sharing on PLC and Instrumentation.

Organized By: E.E.E. Club of International Islamic University Chittagong, Bangladesh. Presented By: Md. Ariful Alam. Assistant Engineer of ABUL KHAIR GROUP OF BANGLADESH. 

Date: 17th December, 2012.